Tire pressure monitoring system is essential for every owner!

Many vehicle owners know clearly that tire pressure monitoring system is necessary. It is a device that actively maintains its own and car safety. It can detect hidden dangers in the tires in time through monitoring, and it will send out distress messages as soon as possible. At this time, the driver can easily propose solutions so that the car can run happily on the road. No accidents can occur.

Car tire pressure monitoring can also extend the service life. With this system, we can specify the pressure and temperature of the car's tires, allowing the tire to wear less and extend its service life. If the lack of air pressure is damaging the tire, the data shows that the tire pressure is less than 10% of the normal value, and the life is reduced more.

Car tire pressure monitoring can also make cars more economical to use. When the pressure is very low, the friction of the ground will hinder the car's forward movement in a larger area. Therefore, when the car maintains a certain pressure, friction is reduced, and the amount of oil consumed naturally decreases.

Car tire pressure monitoring can also reduce the wear of the suspension. If the pressure on the right and left tires of the car is not the same, it will tilt right and left. Just as people walk on uneven land, they always have a low foot and are not very balanced. The pressure is too full and uneven, and when the emergency brake is applied, the car leans on the other road. The wear of the suspension system is self-evident.

The high pressure of automobile tires brings great harm to the safety of the owner's personal property and must be taken seriously. Especially when the tire pressure is relatively high, it is a very difficult thing to get a firm grip on the ground because there is very little contact between the tire and the ground. In rainy days, it is even harder to control the speed of cars. Accelerated and hardened tires can also affect the comfort of people sitting in a car.

There are so many benefits to car tire pressure monitoring that they didn’t need before. It’s not until now that every car can’t miss it. With it, you can safely start the journey of your car every day.

Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Waste Plastic Pyrolysis Plant

Waste Plastic Pyrolysis Plant,Plastic Pyrolysis Plant,Pyrolysis Of Plastic,Waste Plastic Pyrolysis Oil Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com