Hubei Red On fluorite ore beneficiation plant in 1978. The plant was designed by the Changsha Institute of black metallurgy mine design, design size 300t / d.
(1) Ore characteristics: Hong'an fluorite ore is a medium (lower) warm liquid silicate type filled vein fluorite deposit. The deposit is located in the torsional tectonic fracture zone of the Archean Baiyun slant gneiss . The roof of the ore body is dominated by gneiss and syenite porphyry. The bottom plate is mainly composed of tectonic rocks and also has altered Rock and syenite porphyry. The ore is mostly pale green and green, and a small part is light purple and light yellow, glass luster, translucent, semi-self-shaped or he-shaped crystal, ranging in particle size from 0.01 to 2.7 mm, and depending on the degree of enrichment. when large particle concentration, the fine particle dispersed; blocky mineral phase, like the strip, brecciated cloudiness configuration; and in the structure of the main coarse crushing, ranging grained granite still see Crystallized structure, like plaque structure.
The mineral composition is simple, the useful mineral is mainly fluorite, and the content of CaF 2 is generally 20% to 95%, and some are as high as 98%. The gangue minerals are mainly quartz (including chalcedony), which are granular and cluster-like. The aggregates are often vein-like, with a width of 20~30mm, a narrow vein of 0.2-0.5mm, followed by barite (BaSO). 4 ), fine veins and irregular granules are produced in quartz veins, and a small amount is embedded in the gap of fluorite particles. The particle size is generally 0.1~0.4mm, and the maximum is 0.9~1.0mm. Another very small amount of white mica, chlorite.
The content of fluorite and its main gangue quartz is mutually increasing and decreasing. The sum of the two in the rich or medium ore is generally between 95 and 98%, as shown in Table 7. The physical properties of the ore are shown in Table 8, and the multi-element analysis of the ore is shown in Table 9.

Pure Titanium Plate

Titanium Plate/Titanium Sheet/titanium Foil/titanium strip

Item Specification: ASTM B265,ASTM F67,ASTM F136,ISO 5832-2,ISO 5832-3, AMS 4911,GB/T 3621-2007,GB/T 13810-2007

Material: Commercial pure titanium and titanium alloy.

ASTM Grade: Gr.1,Gr.2,Gr.3,Gr.4,Gr.5,Gr.7,Gr.9,Gr.12,Gr.23 W.Nr.: 3.7025,3.7035,3.7055,3.7065,3.7235,3.7105,3.7195,3.7165,3.7164

Size:

Titanium Plate

T:4.76-152mm

L:500-3000m

W:300-1500mm

Titanium Strip

(0.10-0.30)×(50-300)×(≥500)mm

(0.40-0.90)×(50-500)×(≥1000)mm

(1.0-2.0)×(50-500)×(≥2000)mm

Titanium Foil

T:0.025-1.0mm

W:20-330mm
L:coil/Length
Titanium Sheet
T:1.0-4.76mm

L:500-3000m

W:300-1500mm

Product Status: Heat processing(R), Cold processing(Y)

Surface treatment: Polished,Sandblasted,Pickled

Features:
- Low density and high strength
- Excellent corrosion resistance
- Good resistance to effect of heat
- Excellent Bearing to cryogenic property
- Non-magnetic and Non-toxic
- High bio-compatibility

Applications: Machinery,pressure vessel,chemical,electronic equipment,medical,aerospace,etc.

Pure Titanium Plate,Titanium Sheet Metal,6 Mm Titanium Plate,Titanium Sheets Gr2

Titan Super Bond Co., Ltd , https://www.laget-ti.com