Model NO.: LS315
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Model: Lsy 160
Type of Machine: Pipe
Screw Diameter: 160mm
Screw Pitch: 160mm
Rotating Speed: 308rpm
Capacity: 25 M³/H
Trademark: PK
Origin: Henan, China
Model NO.: LS315
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Model: Lsy 160
Type of Machine: Pipe
Screw Diameter: 160mm
Screw Pitch: 160mm
Rotating Speed: 308rpm
Capacity: 25 M³/H
Trademark: PK
Origin: Henan, China


 Brief Introduction
Cement screw conveyor is bulk material handling equipment, which usually consists of a tube containing either a spiral blade coiled around a shaft (sometimes called an auger), driven at one end and held at the other. The main parts include tube, shaft with spiral blades, inlet and outlet chutes, as well as driving device.

 Working principle
Within a tube, the LSY screw conveyor uses a rotating helical screw blade, to move granular and powdery materials. Cement screw feeder is usually installed at a incline in many industries, such as concrete mixing station, bulk material transit storage, etc. 

Main Features
1.Simple structure, good sealing, easy operation and low power invest cost. 
2.It has the features of small screw diameter, high rotation speed and large capacity, specially suitable for inclined transport. The angle is up to 60 degree. 
3.Widely used in chemical, metallurgy, paper making, and construction industries, etc. 
4.Axle head and conveying spiral adopt spline connection, with features of convenient mounting&disassembling, large load capacity and stability. 
5.All sections of screw conveyor are connected with flange. Also screw blades are integral connection. 
6.Inlet and outlet chutes have many kinds of connections, such as flange, sack, universal joint, etc.

 Selection condition
Primary considerations for the selection of a screw conveyor are as follow:
    1.Type and condition of the materials to be handled, including maximum particle size, and, if available, the 
 
specific bulk density of the material to be conveyed.
    2.Quantity of transported material, expressed in pounds or tons per hour.
    3.The distance for which the material is to be conveyed.
Below is the necessary information for the selection of a screw conveyor system, presented in a series of five 
 
steps. These steps are arranged in logical order, and are divided into separate sections for simplicity. The five 
 
steps are:
    1.Establishing the characteristics of the material to be conveyed.
    2.Locating conveyor capacity (conveyor size and speed) on capacity tables.
    3.Selection of conveyor components.
    4.Calculation of required horsepower.
    5.Checking of components torque capacities (including selection of shaft types and sizes)
 Technical Parameters:
 
Model Screw Diameter Screw Rotation Speed Housing Diameter Max. Capacity Max. Length Inclination Angle Power
L ≤ 7m L > 7m
(mm) (r/min) (mm) (t/h) (m) (degree) (kW)
LSY 160 163 308 194 25 15 0°~ 60° 5.5 7.5
LSY 200 185 260 219 40 18 7.5 11
LSY 250 237 200 273 60 25 11 15
LSY 300 285 170 325 90 25 18.5 22
LSY 400 362 170 402 120 25 18.5 22


 Brief Introduction
Cement screw conveyor is bulk material handling equipment, which usually consists of a tube containing either a spiral blade coiled around a shaft (sometimes called an auger), driven at one end and held at the other. The main parts include tube, shaft with spiral blades, inlet and outlet chutes, as well as driving device.

 Working principle
Within a tube, the LSY screw conveyor uses a rotating helical screw blade, to move granular and powdery materials. Cement screw feeder is usually installed at a incline in many industries, such as concrete mixing station, bulk material transit storage, etc. 

Main Features
1.Simple structure, good sealing, easy operation and low power invest cost. 
2.It has the features of small screw diameter, high rotation speed and large capacity, specially suitable for inclined transport. The angle is up to 60 degree. 
3.Widely used in chemical, metallurgy, paper making, and construction industries, etc. 
4.Axle head and conveying spiral adopt spline connection, with features of convenient mounting&disassembling, large load capacity and stability. 
5.All sections of screw conveyor are connected with flange. Also screw blades are integral connection. 
6.Inlet and outlet chutes have many kinds of connections, such as flange, sack, universal joint, etc.

 Selection condition
Primary considerations for the selection of a screw conveyor are as follow:
    1.Type and condition of the materials to be handled, including maximum particle size, and, if available, the 
 
specific bulk density of the material to be conveyed.
    2.Quantity of transported material, expressed in pounds or tons per hour.
    3.The distance for which the material is to be conveyed.
Below is the necessary information for the selection of a screw conveyor system, presented in a series of five 
 
steps. These steps are arranged in logical order, and are divided into separate sections for simplicity. The five 
 
steps are:
    1.Establishing the characteristics of the material to be conveyed.
    2.Locating conveyor capacity (conveyor size and speed) on capacity tables.
    3.Selection of conveyor components.
    4.Calculation of required horsepower.
    5.Checking of components torque capacities (including selection of shaft types and sizes)
 Technical Parameters:
 
Model Screw Diameter Screw Rotation Speed Housing Diameter Max. Capacity Max. Length Inclination Angle Power
L ≤ 7m L > 7m
(mm) (r/min) (mm) (t/h) (m) (degree) (kW)
LSY 160 163 308 194 25 15 0°~ 60° 5.5 7.5
LSY 200 185 260 219 40 18 7.5 11
LSY 250 237 200 273 60 25 11 15
LSY 300 285 170 325 90 25 18.5 22
LSY 400 362 170 402 120 25 18.5 22

Drag Chain

Drag Chain
INNER SIZE H35*W75 ENCLOSED TYPE PLASTIC CABLE DRAG CHAIN

(1) The drag chain looks like a tank chain, composed of many unit links, links between freely rotation.

(2) The inner height, outer height and pitch of the same series of drag chains are the same, and there are different choices for the inner width and bending radius R of the drag chain.

(3) The unit chain is composed of left and right chain plates and upper and lower cover plates. Each drag chain can be opened, which is convenient for installation and disassembly. 35x75 cable drag chain does not need threading.

(4) Another separator and 35.100 cable drag chain can be provided to separate the space in the chain as required.


High pressure and tensile load, good toughness, high elasticity and wear resistance, flame retardant, high and low temperaturestable performance, can be used in the outdoor.

Drag Chain,Cable Drag Chain,Plastic Drag Chain,Enclosed Drag Chain

Hebei Baisite Machinery Accessories Co.,Ltd , https://www.jiaomujian.com