BAODING HUAYUE RUBBER BELTS CO., LTD
Baoding Huayue Rubber Belts Co., Ltd is one of the top 10 conveyor belt manufacturers in China. With over 800 staff members, the company has a registered capital of 200 million RMB and an annual production capacity of 30 million square meters.
MAIN PRODUCTS
EP Conveyor Belt
Nylon Conveyor Belt
Canvas Conveyor Belt
Steel Cord Conveyor Belt
Sidewall Conveyor Belt
Fire Retardant (PVC, PVG) Conveyor Belt
Heat Resistant Conveyor Belt
Cold Resistant Conveyor Belt
Oil/Acid/Alkali Resistant Conveyor Belt
Special Pattern (Chevron) Conveyor Belt
Conveyor Idler/Roller
Conveyor Frame/Bracket
Head Pulley/Tail Pulley
GENERAL SPECIFICATION
Layer: 1-10 ply
Width: 400-2200mm
Thickness: 3-30mm
STANDARDS
DIN22102, RMA, AS1333, AS1332, DIN22109, DIN14890, DIN22102, ISO22721, ISO3684, SANS1173, SANS1366, SANS971, JISK6322, BS3289, ISO14890
WHOLE CORE FLAME RESISTANT CONVEYER BELT (PVC/PVG TYPE)
This type of conveyor belt is divided into two categories: PVC and PVG.
- PVC type conveyor belts have PVC coating covers on both top and bottom layers, with a single-sided tape thickness ≥1.0mm and an inclination angle <16°.
- PVG type conveyor belts use nitrile rubber and PVC for the upper and lower layers, featuring TPE properties, with a single-sided tape thickness of 1-3mm and an inclination angle <20°.
The structure is made from the whole core via dipping and plastifying in polyvinyl chloride (PVC) dipping agent or vulcanization. It is fire retardant, antistatic, shock-resistant, abrasion-resistant, and corrosion-resistant.
Application: Suitable for underground coal mine haulage and material conveyance in metallurgical and chemical industries.
TECHNICAL DATA
STEEL CORD CONVEYER BELT
General Steel Cord Conveyer Belt
This type of belt uses new steel cords as tear-resistant elements. It has high tensile strength, small elongation, excellent troughability, and high flexibility, making it suitable for long-distance, large-volume, and high-speed material conveyance.
Tear Resistant Steel Cord Conveyor Belt
Reinforcing layers of steel cords, fabric, etc., are evenly laid perpendicular to the lengthways steel cables on one or both sides. This provides excellent impact and tearing resistance performance.
Tear Resist Belt With Detector
It uses new steel cords as tear-resistant elements. Between the core rubber and bottom cover of the steel cord conveyor belt, a phase shift sensor (coil) is installed at certain intervals. It automatically alarms and stops when a tear is detected or when the belt runs abnormally and reaches the preset off speed.
TECHNICAL DATA
| PVC | Standard MT914-2008 | Safety Coefficient 10 (Break Strength ×1/10) | |||||
| Slope Angle <16° | |||||||
| PVG | Standard MT914-2008 BS3289 HG2805 | ||||||
| Slope Angle <20° | |||||||
| Standard Type | Grade | Break Strength≥, N/mm | Elongation at Break % | Advising Min Dia. of Transmission Drum (mm) | |||
| Longitudinal | Horizontal | Longitudinal | Horizontal | PVC | PVG | ||
| 680S | 4 | 600 | 265 | ≥15% | ≥18% | 320 | 400 |
| 800S | 5 | 800 | 280 | 400 | 500 | ||
| 1000S | 6 | 1000 | 300 | 500 | 630 | ||
| 1250S | 7 | 1250 | 350 | 500 | 750 | ||
| 1400S | 8 | 1400 | 350 | 630 | 750 | ||
| 1600S | 9 | 1600 | 400 | 1000 | 1000 | ||
| 1800S | 10 | 1800 | 400 | 1000 | 1000 | ||
| 2000S | 11 | 2000 | 400 | 1250 | 1250 | ||
| 2240S | 12 | 2240 | 450 | 1250 | 1250 | ||
| 2500S | 13 | 2500 | 450 | 1400 | 1400 | ||
| Technical Data | Belt Strength | |||||||||||||
| ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
|
| Longitudinal Tensile Strength (N/mm) | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 2800 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
| Max Nominal Dia. of Steel Cord (mm) | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 6.0 | 7.2 | 7.5 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
| Steel Cord Pitch (mm) | 10 ±1.5 | 10 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 16 ±1.5 | 17 ±1.5 | 17 ±1.5 |
| Thickness of Top Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Thickness of Bottom Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Width (mm) | Numbers of Steel Cord | |||||||||||||
| 800 | 75 | 75 | 63 | 63 | 63 | 63 | 50 | 50 | 50 | 50 | ||||
| 1000 | 95 | 95 | 79 | 79 | 79 | 79 | 64 | 64 | 64 | 64 | 64 | 59 | 55 | 55 |
| 1200 | 113 | 113 | 94 | 94 | 94 | 94 | 76 | 76 | 76 | 76 | 76 | 71 | 66 | 66 |
| 1400 | 133 | 133 | 111 | 111 | 111 | 111 | 89 | 89 | 89 | 89 | 89 | 84 | 78 | 78 |
| 1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 101 | 101 | 101 | 96 | 90 | 90 |
| 1800 | 171 | 171 | 143 | 143 | 143 | 143 | 114 | 114 | 114 | 114 | 114 | 109 | 102 | 102 |
| 2000 | 196 | 196 | 159 | 159 | 159 | 159 | 128 | 128 | 128 | 128 | 128 | 121 | 113 | 113 |
| 2200 | 216 | 216 | 176 | 176 | 176 | 176 | 141 | 141 | 141 | 141 | 141 | 134 | 125 | 125 |
| The Recommended Minimum Pulley Diameter | ||||||||||||||
| ST Belt Type | ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
| Minimum Pulley Diameter (mm) | 500 | 500 | 630 | 800 | 1000 | 1000 | 1250 | 1250 | 1400 | 1600 | 1600 | 1600 | 1800 | 1800 |
France Series Wash Pump,France Series Washer Pump,Washer Fluid Pump,Windshield Water Pump
ruian city yixuan auto parts co.,ltd , https://www.yixuanauto.com