The normal number of cycles of electric forklift batteries is generally between 800 and 1,500. In addition to quality issues, the battery life will last for one year, depending on the environment in which the electric forklift is used. Up to five years. Although the battery brands used by some companies are very famous and their quality is guaranteed, some electric forklift batteries can be used for five years, but some can't be maintained for a year. What are the reasons for this? ?
Because the electric forklift is short in the transportation distance at each interval, the vehicle will frequently stop and start, and the forklift battery will consume a lot of electricity in such a use operating environment, under such a long-time high-current charging situation. As a result, the reaction of the water in the storage battery will increase, resulting in more gas and water loss of the battery. At the same time, too much gas evolution will cause the separation force between the active material and the grid to decrease, resulting in the formation of The falling of the active material makes the battery electrolyte of the electric forklift more turbid. Also, too much gas evolution will increase the pressure of the gas inside the battery. If the exhaust gas is not smooth, the internal acid gas and water vapor of the battery will be forced by the high pressure. Spray out. Because its pressure can be well released, there is still a safety risk of explosion.
Because the structure of the electric forklift will be relatively small, the radius of the electric forklift will also be relatively small. In the battery electrolyte due to the effect of centripetal force will occur in the internal fierce reverberation, some electrolytes will be in charge of the operation of the situation will be rushed to the location of the exhaust bolt, if the choice of exhaust gas or in the Improperly designed, it will cause the electrolyte of the electric forklift battery to overflow. Because the shock absorbing performance of the forklift will be relatively poor, the exhaust gas exhaust device of the battery should be secured.
Therefore, no matter how big a brand or more expensive batteries, improper operation of the electric forklift, or improper maintenance, will cause the battery to reach the expected use period of premature damage. Driving an electric forklift is not only demanding high efficiency, but also the safety of transportation, and it is also important for electric forklift and battery maintenance and maintenance.
The rubber crushing machine consists of one crushing machine, cyclone separator, electric control cabinet and water supply mechanism. The Rubber crusher is mainly used for processing rubber powder from waste tires.
The application of rubber powder can be divided into two major areas: one is the direct molding or with new rubber products, which belongs to the category of rubber industry; Second, it is applied in the wide field of non-rubber industry. At present, more and more manufacturers around the world use rubber powder instead of raw materials, which is not only beneficial to environmental protection, but also more important because the use of rubber powder can effectively reduce the cost, improve the performance, can get the effect that other materials can not. It can be widely used as rubber, filler and composite material for tires, rubber pipes, rubber tapes, rubber shoes, rubber industrial products, wires, cables and building materials. Rubber powder can also be used with plastics, such as polyethylene, polypropylene, polyurethane, etc., to improve performance and reduce cost.
Rubber crusher, Tire crusher , rubber crushing machine
Shuangxing Mechanical Equipment Co.,Ltd , https://www.gyshuangxing.com