The once-annual double 11 is coming soon. This year's Double 11 is still very lively. With the increase of all kinds of fresh produce on the Tmall National Fresh Produce section, this means that the demand for fresh cold chain and logistics distribution will further increase. With regard to the expansion, the relevant person in charge of Tmall Fresh said that this year's "Double 11" will force expansion of product categories and upgrade after-sales services. A very important part of the after-sales service mentioned here includes logistics and distribution.
Talking about logistics and distribution, many people will think of air transport at the first time. This is natural, fast and steady is its main transportation characteristics. But to say the last mile, it still has to rely on refrigerated trucks. The city of Suizhou in Hubei Province, which is known as the capital of special autos, has long been ready to go. The existing large-capacity Universiade Opel refrigerated trucks are now available for sale by national logistics service providers. Let's look at the following vehicle configurations:
The Oyunolulu five-row semi-refrigerated trucks can achieve a cargo bed size of 3750×2050×2200mm. The car body panels are constructed with inner fiberglass outer color steel plates. The thickness of the car body reaches 5mm, and the thickness of the carcass is 8CM. Polyurethane foam board, good insulation effect.
Refrigerator unit a variety of brands, a variety of temperature options, the current more commonly used several major brands are: Huatai, Kelly, Carrier, Kunshan Hanya, Hanxue, etc., the brand is diverse, the price is also high and low.
In the chassis construction, the cab is equipped with a 1995 half/single row opry luxury cab, Guowuyun internal engine (Sino-German joint venture), 125 horsepower, Wanliyang six-speed gearbox, 2.5 tons front axle, and 3.5 rear axles. Ton, with direction assistance, air brake, 750R16 wire tires, but also enjoy the policy of free maintenance of 100,000 kilometers.
At present, China's cold-chain logistics market is still a loosely-divided market, and the related cold-chain transportation facilities are still in short supply. China currently has at least 500,000 third-party logistics service providers, of which the larger ones only occupy market share. Less than 2% means that there is still much room for development in the cold chain transportation industry. The arrival of Double 11 will greatly stimulate the development of refrigerated trucks!
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
PROJECT |
|
|
1 |
Equipment Model |
XY-7 |
XY-8 |
|
2 |
Door Model |
Full Open Door |
Full Open Door |
|
3 |
Suitable Raw Materials |
Rubber/Plastic Products |
Rubber/Plastic Products |
|
4 |
Structure |
Horizontal Type Revolves |
Horizontal Type Revolves |
|
5 |
Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
Φ2200*6000mm Φ2600*6600mm |
|
6 |
Capacity for One Batch |
5-6Mt; 8-10Mt |
5-6Mt; 8-10Mt |
|
7 |
Oil Yield of Tires |
40%-45% |
40%-45% |
|
8 |
Work Pressure |
Normal Pressure |
Normal Pressure |
|
9 |
Reactor Rotation Speed |
0.4R/M |
0.4R/M |
|
10 |
Fuels Choice |
Coal, Wood |
Coal, Wood, Gas, Oil |
|
11 |
Power |
18KW/H |
18-25KW/H |
|
12 |
Cooling Method |
Water Cycling |
Water Cycling |
|
13 |
Type of Drive |
External Annular Gear |
External Annular Gear |
|
14 |
Heating Method |
Direct |
Direct |
|
15 |
Type of Installation |
With Foundation |
With Foundation/Integrated Base |
|
16 |
Noise dB(A) |
≦85 |
≦85 |
|
17 |
Operation Mode |
Intermittent Operation |
Intermittent Operation |
|
18 |
Total Weight(MT) |
25-40 |
25-40 |
|
19 |
Installation Space Required |
30m*10m |
30m*10m |
|
20 |
Manpower |
3~4/batch |
3~4/batch |
|
21 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Waste Tyre Pyrolysis Plant
Waste Tyre Pyrolysis Plant,Pyrolysis Plant ,Tyre Pyrolysis,Tyre Recycling
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl