Resolve several major security risks During driving on weekdays, there may be safety hazards that may not be noticeable to all kinds of vehicles, including abnormal engine noise, abnormal gearbox, broken brakes, and broken tires. How should we avoid and how should we respond? In this special issue of the International Finance News 3,15, this reporter visited several dealers and manufacturers to find out after sales. Although people in the industry have given some solutions and suggestions, they believe that good driving habits and timely maintenance and inspection are the effective sources of accidents.

Transmission fault hidden level:

One of the most prominent examples of last year was the Volkswagen DSG gearbox incident. With more and more Volkswagen cars equipped with 6-speed and 7-speed DSG dual-clutch gearboxes, models equipped with a 7-speed DSG gradually experienced abnormal phenomena such as abnormal noise, jitter, and setbacks, resulting in more than 400 owners targeting DSG gearboxes. Many issues were brought to the public. Although the public later publicly recalled the problem vehicles, the impact still exists.

The gearbox is a big item in the auto parts that is more important and more expensive. Therefore, if the gearbox is found to be abnormal due to minor losses, early detection, early maintenance, and early maintenance should be done. The use of standard oils for oil change, high-quality transmission oils and high-quality strainers are also essential to guarantee lubrication, heat dissipation and noise reduction.

In the daily routine, due to water intrusion or minor faults that are not repaired in time, damage to the gearbox or even scrapping occurs. “The most important thing is that the incorrect operation habits lead to gearbox damage.” A salesperson at a Beijing auto 4S store cited several major driving mistakes to the “International Finance” reporter. Myth # 1: When the vehicle is parked for a long time, the shift lever is still hung in the D range. Misunderstanding 2: When driving at high speed or downhill, shift the shift lever to slide in the N range. Myth #3: Start the engine in gears other than the automatic transmission P or N.

Airbag fault hidden level:

Airbags are almost the necessary safety equipment for different brands and different grades of cars. Once the airbags fail, the consequences can be disastrous. In fact, in some special cases, there is really no safety protection that people expect it to have. It is often possible to see things like airbags that are completely unopened in car accidents and airbags that have no accidents. The situation suddenly popped up.

There are many cases in which auto companies have recalled airbags. The biggest one in the past two years was in May 2011. Vehicle airbags may be deployed under excessive pressure, resulting in casualties. Honda launched the fourth airbag failure vehicle recall since 2008. The recall involved more than 833,000 Honda and Acura brand vehicles. Vehicle production time was between 2001 and 2003 and a total of 1.65 million vehicles were affected.

"We must strengthen the maintenance and inspection of airbags, and we must not arbitrarily change the circuit of the car and refit new equipment." A repairman in Tongzhou, Beijing, told reporters.

Brake Failure Hidden Level:

Brakes are a vital part of car safety. Every driver should pay special attention to it. There are many causes of brake failure. One is the lack of necessary maintenance on the brake system; the other is that the device malfunctions due to improper operation; and the third is due to severe overload, under the effect of gravity acceleration, the inertia of the vehicle movement is increased, and the brake is directly caused. Failure.

The probability of occurrence of a brake failure is not very high. Once it occurs, it may affect other parts and cause the danger. Recently, BMW Motor Co. announced that it will recall more than 30,000 SUVs to repair an oil spill problem that may cause the brakes to malfunction.

“Each time you drive, you can test the brake pedal. The brake pedal will be hard before the engine is started. After the engine starts normally, the brake pedal will sink slightly. This is normal.” A car in Fengtai District Repair shop personnel told reporters, "Sometimes we press the pedals will feel brakes are soft, braking distance significantly longer, the brakes are weak, this situation must be taken seriously."

Steering Wheel Threat Hidden Level:

Although the steering wheel will not cause major failures, its importance cannot be ignored. If the direction cannot be controlled, how can we ensure driving safety? Of course, the accident caused by the failure of the steering wheel is not a minority. At the beginning of this year, Suzuki conducted a large-scale recall of steering wheel jitter. It involved a total of 13,227 vehicles in the Chinese mainland, mainly imported Suzuki Jimny models from 2007 to 2013.

Regarding this hidden danger, a manager Zhang, who has been involved in after-sales service for many years, believes that drivers should pay more attention to driving, and if they find that there is a slight misconduct in the area, they can promptly avoid accidents. At the same time, for these key components, car manufacturers should be more rigorous when testing, to ensure that everything can be taken off the market, do not rush to sell and make it a security risk.

Tyre puncture hidden danger level:

There is a joke: the car is a creature with four wheels. Tyres are important for cars, and the accidents caused by punctures account for a large proportion of accidents, especially when driving on highways. If punctures occur, the consequences will be disastrous.

In general, the cause of a puncture is inadequate or excessive tire pressure, as well as strong external forces (such as tire tying) and overloading. But first of all, we must remind everyone that punctures do not only occur in summer. If the air pressure is high or low, the tires of vehicles may burst even in winter. Owners should check the tires frequently, pay attention to selecting roads during driving to avoid sharp objects, and do not expose the car to the sun in the summer. Of course, overloading is absolutely not allowed.

Ignition System Failure Hidden Level:

In the automotive repair process, the relatively high failure rate of the ignition system is one of the most common failures. Many car repair masters told reporters that the analysis of the working conditions of the car ignition system, most car owners only stay in a direct impact on engine dynamics and economics, lack of due attention. In fact, the damage caused by the failure of the ignition system may be enormous. In extreme cases, imperfections in the ignition system can cause the engine to stall and fail to restart so that it can be life-threatening.

On the ignition system, Nissan has conducted a large-scale recall for this purpose. On October 28, 2010, Nissan announced that due to defects in the ignition system, the company will recall 2.14 million vehicles in the United States, Japan, Europe and Asia. Ignition system fault prevention is to check on weekdays. In the event of ignition, if abnormal conditions are found, it should be repaired as soon as possible.

Engine abnormal sound hidden level:

Engine failure can be a frequent visitor to automotive safety hazards. More than 20% of vehicle faults are engine problems. Although manufacturers are constantly updating and improving in this area, complaints still appear one after another.

Shanghai Volkswagen Lai Yi, Southeast Ling Yue, Skoda Jing Rui and other engine abnormal events have occurred, or have been complained or recalled directly.

It is understood that engine noise is related to various factors such as engine speed, load, temperature, cylinder position, work cycle, and lubrication conditions. Since the sound is loud or small, it is best to stop immediately if something is wrong.

ABS fault hidden level:

If the ABS anti-lock brake control system (abbreviated as ABS) fails during operation, it will affect the safety of the driver and the car. Due to ABS defects, General Motors will recall some imported Opel Andhra and Chevrolet Koppich cars from March 7, 2012, involving a total of 16,618 imported Chevrolet Kopaqi and 1,586 Opel Andra.

The cause of ABS defects is the presence of impurities in the vehicle brake fluid, which may affect the normal operation of the anti-lock brake module. In extreme cases, it may cause the braking distance to lengthen, or the braking deviation, there is a potential safety hazard. In fact, from this recall, we can also see that the operation of ABS is related to a number of parts and components. Through regular and effective fault detection of ABS, it provides favorable evidence for follow-up maintenance and overhaul, so as to achieve a good running status of the ABS car, thus ensuring the safety of the driver and the car.

Machining Steel

Machining Steel is the use of CNC machining out,and the machining services including drilling, boring, cutting,meatl bending/metal bending, machining Steel Product material: carbon steel, 20#, 45#, A3, Q235,35Cr2MnMo and other series. In the high-speed machining out of the workpiece has a good finish. But machining Steel of the workpiece is easy to rust, so it will do heat treatment, surface nickel plating, chromium plating, surface black heat treatment, etc.. We have a special inspection department to carry out inspection, ensure the material aging hardness and each size to meet the requirements of the drawings, including the machining steel parts application in various industries: automotive, marine, communications, medical equipment, industrial automation equipment.Except them,we supply the sheet metal operations.

Machining Steel, CNC Machining Steel, Machining Steel Parts, Metal Machining

Hong Kong RYH CO., LTD , https://www.szcncturning.com