Summer tire maintenance analysis

According to the International Driving Safety Survey, traffic accidents in rainy days are about five times higher than usual. Summer rains have a lot of rainfall, the roads are slippery, and tires' adhesion is reduced. They put a lot of tests on automobile tires.

The tire pressure is too high, do not pour cold water

For the maintenance of tires in the summer, experts pointed out that first of all, the tire must be checked before driving. The depth of the tread pattern for the rainy season must not be less than 1.6 mm, preferably 3 mm or more, because the shallow depth of the tread of the tire will reduce the drainage capacity of the tire, resulting in a decrease in wetland grip and affecting the safety of driving, especially the rear tires. Side slip or tail flick may occur during cornering.

Second, choose qualified tires and replace tires regularly. There are many reasons for causing a flat tire, and tire performance deterioration is the culprit. Even if the tire is more durable, it cannot be used for a lifetime. When the tire wears gradually, the steel wire gradually fatigues, and the tread ages, its performance will inevitably weaken.

Third, check the tire pressure frequently, including the tire pressure of the spare tire. In the scorching summer, the tires are in contact with hot surfaces. If the tire pressure is high, it may cause a puncture. Therefore, do not let the tire pressure be too high when you go down at high temperatures.

Fourth, if the temperature of the tire is found to be too high, the tire should be parked in a shaded place so that the temperature and pressure of the tire will naturally drop.

Challenge 2: wet road

Tires do not choose expensive only to find

Tire like a car's shoes, for driving safety and comfort considerations, of course, throughout the year can not only wear the same pair of "shoes." Many car owners put tires on snow in the winter, but nowadays, they have more professional tires for road conditions such as wet roads, emergency corners and bumpy roads, which can effectively resist the danger from the road and make the car Easily deal with rainy days!

“The safety function zone of Three-energy tires is characterized by its unique tread pattern elements. The coherent large-angle beveled face pattern and wide longitudinal grooves can effectively discharge the water of the tire area, thereby ensuring the grip of the tire on wet surfaces. And manipulative.” According to Goodyear’s safety experts, the control function zone consists of a solid shoulder block and a continuous stencil. This structure can provide the vehicle with a sensitive steering response. Even if you make an emergency turn or brake in a sudden situation, you can achieve extraordinary stability and control. The comfort zone of Trinity tires is located on the rubber cushion in the inner layer of the tread, which contains a buffer layer in the multilayer tread. Do not underestimate this thin layer of cushioning between the tread rubber and the steel belt. It not only absorbs impact, improves comfort, but also can effectively reduce tire noise.

Challenge 3: Rugged Road

Rough roads to avoid tire damage

Wenchuan earthquake affected all Chinese people. If you drive to a disaster, driving a car and choosing a tire are also very particular. Good and skilled driving techniques can effectively reduce tire wear, extend the life of the tire, and improve driving safety.

First of all, on roads with poor road conditions, do not start too aggressively so as to avoid tread wear due to tires and ground dragging. When vehicles are driving downhill, the appropriate speed should be controlled according to the length of the slope and the condition of the road surface. This can be avoided. Or use less emergency braking to reduce tire wear; the vehicle should turn according to the curved road conditions, turning radius, generally appropriate deceleration, so as to avoid unilateral tire wear due to inertial force and centrifugal force.

When you drive up a bumpy road, you must choose the road surface to reduce the impact between the tire and the road and avoid damage to the machine and tires. Second, slow down and avoid tire bumps and strong vibration; through muddy areas, should choose a more solid, non-slip through the place, so as not to subsidence tires, idling in place, severe vibration caused severe tire and sidewall cuts, scratches.

Tips

There are ways to use tires

When choosing and using tires, scientific methods should be followed, otherwise, due to various factors, the service life of tires will be greatly reduced. The attention is now announced as follows:

parking:

1. Keep tires away from heat, power generation equipment, and where ozone is generated.

2. Tyres must not be too close to oils, flammables and chemically corrosive products.

Pressure:

1. Tires should be inflated according to the air pressure load correspondence table specified in the national standards.

2. After the tire is inflated, check for leaks at various locations. Repair the leak if it is found.

3. The tire must ensure normal internal pressure during use. When running or working for a long time, check the tire pressure regularly.

4. When parking for a long time, the front and rear axles must be erected.

5. The air pressure is too high, the tires are easy to wear crowns and top blast; the air pressure is low, and the tires are easily deformed and grinded.

6. When twins are installed together, the inflation of the two babies should be the same, and one air pressure and one air pressure can not be high.