The jaw crusher is mainly used for medium-sized crushing of various ores and bulk materials, and can crush materials with compressive strength of not more than 320Mpa, which are divided into coarse and fine broken. Jaw crusher (broken jaw) is widely used in a variety of mining, metallurgy, building materials, road, rail, water and chemical industries, the structure of the main frame, eccentric shaft, large pulley, the flywheel, moving jaw, side guards The plate, the toggle plate, the rear seat of the bracket, the adjusting screw, the return spring, the fixed jaw and the movable jaw, etc., wherein the bracket also plays an insurance role.
2. The finished product of the impact crusher is cubic, no tension and crack, and the grain shape is quite good. It can crush all kinds of coarse, medium and fine materials ( granite , limestone) with the feed size not exceeding 500mm and the compressive strength not exceeding 350MPa. , concrete, etc.), impact crusher is widely used in various ore crushing, highway, chemical, energy, cement, railway, construction and other industries. The size of the discharge material can be adjusted, and the crushing specifications are diversified.
3. Hammer crusher
The principle of the hammer crusher is to crush the material by colliding with the material at high speed. The hammer crusher has the characteristics of simple structure, large crushing ratio and high production efficiency. The hammer crusher can be used in both dry and wet forms. broken, for mining, cement, coal, metallurgical, building materials, road, burning of medium hardness and other departments crushing brittle materials. The materials crushed by the hammer crusher are coal, white Asia, brick, tile, gypsum , salt, alum, limestone and the like. The compressive strength of the material does not exceed 100 MPa and the humidity is not more than 15%.
4. Cone crusher
The cone crusher is a perfect combination of crushing speed, eccentricity (stroke) and high-performance crushing cavity design. Hammer crusher is widely used in metallurgy, construction, road construction, mining, quarry and other industries. It can break medium and Various ores and rocks above medium hardness. From limestone to basalt , from stone production to various ore crushing, the cone crusher provides unmatched crushing performance in a variety of medium, fine and superfine operations.
5.Composite crusher
The composite crusher is mainly used for crushing cement raw materials and clinker in medium-sized cement plants. It is also suitable for the crushing of other medium hard ores such as iron ore, sandstone , gypsum, blast furnace slag, coal gangue and lump coal. The composite crusher has the characteristics of large crushing ratio, low energy consumption, stable operation, simple structure and convenient operation and maintenance.
U Channel Roll Forming Machine
U channle are used for steel structure building ,solar panel system a lot.We are very familiar with c purlin or z pulrin,for construction contractor,they also use u channel a lot with punching system,
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously
U Channel Roll Forming Machine,C Z Roll Forming Machine,Channel Solar Forming Machine,Full Auto CZ Type Steel Channel
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com