BAODING HUAYUE RUBBER BELTS CO., LTD
Baoding Huayue Rubber Belts Co., Ltd is one of the top 10 conveyor belt manufacturers in China. With over 800 staff members, our company has a registered capital of 200 million RMB and an annual production capacity of 30 million square meters.
MAIN PRODUCTS
- EP Conveyor Belt
- Nylon Conveyor Belt
- Canvas Conveyor Belt
- Steel Cord Conveyor Belt
- Sidewall Conveyor Belt
- Fire Retardant (PVC, PVG) Conveyor Belt
- Heat Resistant Conveyor Belt
- Cold Resistant Conveyor Belt
- Oil/Acid/Alkali Resistant Conveyor Belt
- Special Pattern (Chevron) Conveyor Belt
- Conveyor Idler/Roller
- Conveyor Frame/Bracket
- Head Pulley/Tail Pulley
GENERAL SPECIFICATION
- Layer: 1-10 ply
- Width: 400-2200mm
- Thickness: 3-30mm
STANDARDS
DIN22102, RMA, AS1333, AS1332, DIN22109, DIN14890, DIN22102, ISO22721, ISO3684, SANS1173, SANS1366, SANS971, JISK6322, BS3289, ISO14890
WHOLE CORE FLAME RESISTANT CONVEYER BELT (PVC/PVG TYPE)
This type of conveyor belt is divided into two categories: PVC and PVG. The top and bottom layers of the PVC type are PVC coating covers with a single-sided tape thickness ≥1.0mm and an incline angle <16°. The PVG type features nitrile rubber and PVC on the upper and lower layers, with a single-sided tape thickness of 1mm-3mm and an incline angle <20°. It is fire retardant, anti-static, shock-resistant, abrasion-resistant, and corrosion-resistant.
APPLICATIONS
Used for underground coal mine haulage and material transportation in metallurgical and chemical industries.
TECHNICAL DATA
STEEL CORD CONVEYER BELT
General Steel Cord Conveyer Belt
It uses new type steel cord as the tear resistant element. It has high tension strength, small elongation, excellent troughability, and high flexibility. It is suitable for long-distance, large freight volume, and high-speed material conveyance.
Tear Resistant Steel Cord Conveyor Belt
On one or both sides, vertical steel cables are evenly laid to provide reinforcing layers. It has excellent impact and tearing resistance performance.
Tear Resist Belt With Detector
It uses new type steel cord as the tear resistant element. Between the core rubber and bottom cover of the steel cord conveyor belt, a phase shift sensor (coil) is installed at a certain distance lengthways. It gives out an alarm and stops automatically when a tearing of the belt is detected or when the belt runs abnormally and reaches the preset off speed.
TECHNICAL DATA
| PVC | Standard MT914-2008 | Safety Coefficient 10 (Break Strength ×1/10) | |||||
| Slope Angle <16° | |||||||
| PVG | Standard MT914-2008 BS3289 HG2805 | ||||||
| Slope Angle <20° | |||||||
| Standard Type | Grade | Break Strength≥, N/mm | Elongation at Break % | Advising Min Dia. of Transmission Drum (mm) | |||
| Longitudinal | Horizontal | Longitudinal | Horizontal | PVC | PVG | ||
| 680S | 4 | 600 | 265 | ≥15% | ≥18% | 320 | 400 |
| 800S | 5 | 800 | 280 | 400 | 500 | ||
| 1000S | 6 | 1000 | 300 | 500 | 630 | ||
| 1250S | 7 | 1250 | 350 | 500 | 750 | ||
| 1400S | 8 | 1400 | 350 | 630 | 750 | ||
| 1600S | 9 | 1600 | 400 | 1000 | 1000 | ||
| 1800S | 10 | 1800 | 400 | 1000 | 1000 | ||
| 2000S | 11 | 2000 | 400 | 1250 | 1250 | ||
| 2240S | 12 | 2240 | 450 | 1250 | 1250 | ||
| 2500S | 13 | 2500 | 450 | 1400 | 1400 | ||
| Technical Data | Belt Strength | |||||||||||||
| ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
|
| Longitudinal Tensile Strength (N/mm) | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 2800 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
| Max Nominal Dia. of Steel Cord (mm) | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 6.0 | 7.2 | 7.5 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
| Steel Cord Pitch (mm) | 10 ±1.5 | 10 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 16 ±1.5 | 17 ±1.5 | 17 ±1.5 |
| Thickness of Top Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Thickness of Bottom Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Width (mm) | Numbers of Steel Cord | |||||||||||||
| 800 | 75 | 75 | 63 | 63 | 63 | 63 | 50 | 50 | 50 | 50 | ||||
| 1000 | 95 | 95 | 79 | 79 | 79 | 79 | 64 | 64 | 64 | 64 | 64 | 59 | 55 | 55 |
| 1200 | 113 | 113 | 94 | 94 | 94 | 94 | 76 | 76 | 76 | 76 | 76 | 71 | 66 | 66 |
| 1400 | 133 | 133 | 111 | 111 | 111 | 111 | 89 | 89 | 89 | 89 | 89 | 84 | 78 | 78 |
| 1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 101 | 101 | 101 | 96 | 90 | 90 |
| 1800 | 171 | 171 | 143 | 143 | 143 | 143 | 114 | 114 | 114 | 114 | 114 | 109 | 102 | 102 |
| 2000 | 196 | 196 | 159 | 159 | 159 | 159 | 128 | 128 | 128 | 128 | 128 | 121 | 113 | 113 |
| 2200 | 216 | 216 | 176 | 176 | 176 | 176 | 141 | 141 | 141 | 141 | 141 | 134 | 125 | 125 |
| The Recommended Minimum Pulley Diameter | ||||||||||||||
| ST Belt Type | ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
| Minimum Pulley Diameter (mm) | 500 | 500 | 630 | 800 | 1000 | 1000 | 1250 | 1250 | 1400 | 1600 | 1600 | 1600 | 1800 | 1800 |
Industrial Hose,Rubber Hose,Rubber Tube,Stainless Steel Hose
Hebei no one but god energy equipment co.,ltd , https://www.p-harcourtbrothers.com