Plastic Sheet Extrusion Machines

PE PP Sheet Board Production Line

 
1, Sheet Application

 
1)      Chemical industry
 
2)      Packing
 
3)      Medicine
 
4)      Food
 
5)      Stationery and etc.

 
2, Sheet width range

 
500-2000mm

 
3, Sheet thickness range

 
0.25-25mm

 
4, Production line configuration

 
1)      Electricity control cabinet
 
2)      Single screw extruder
 
3)      Mould
 
4)      Mesh changer
 
5)  Lamination unit
 
6)      Cooling bracket
 
7)      Side-trimming unit
 
8)      Hual-off unit
 
9)      Lamination unit
 
10)   Cutter
 
11)   Conveyor

 
5, Auxiliaty machine

 
Auxiliary machine are used for recycling , the pvc sheet which are from side-trimming
can be used again .

 
1)      Crusher
 
Application : crushing the PVC sheet into small pieces

 
2)      Mixer
 
Application : mixing all materials even .

 
3)      Air compressor
 
Application : providing air .

 
6, Production period

 
50 working days after prepayment

 
7, Payment terms

 
T/T ( pre-payment 30% , balance 70%)

 
8, Warranty period

 
1 year after machine's delivery .

 
9,After-sales services
 

1) Final commissioning and training at buyer's factory.
 
2) The seller will send 1 or 2 engineers to make the final commissioning and training. All the charges (round air ticket charge, food, lodging and other local charges) have to be borne by the buyer.
 
3) US $ 100 for each engineer per day out of China should be paid by buyer

4) Both parties will negotiated the time for the final inspection and training according to the conditions between both sides.

Laser Cladding Powder

Nickel Based Laser Cladding Powder

Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.

Cobalt based Laser Cladding Powder

Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.

Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.

Iron based Laser Cladding Powder

The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.

WC blended Laser Cladding Powder

Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.

Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com