Wilmette Fire Department's Tower Ladder 27 has found a new home with the Stuart Fire Department in Stuart, Iowa, where it is now proudly known as Tower Ladder 23. This transition marks a new chapter for the apparatus, which has been serving communities in Illinois before making its way across the country. The fire truck was recently purchased by the Stuart FD, and the two departments had the opportunity to meet and share a moment of camaraderie.
Wilmette FD Tower Ladder 27
Members of the Stuart Fire Department (IA) with members of the Wilmette Fire Department
Former Wilmette FD Tower Ladder 27 is now Stuart FD Tower Ladder 23 in Iowa.
Larry Shapiro photo
This transfer not only helps the Stuart Fire Department expand its capabilities but also highlights the spirit of cooperation between fire departments across the country. It’s a great example of how equipment can be reused and repurposed to serve new communities. The photo shows the former Wilmette Tower Ladder 27 being introduced to its new role in Iowa, and it’s clear that the truck is still in excellent condition, ready to protect lives and property in its new location.
Welded Bed Plate For Flanges Of Ship Pipe
The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes.
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.
Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com