In 1997, in an update of the air compressor equipment, a compressed heat dryer with a processing capacity of 200m3/min was purchased from Henderson Company, equipped with a front-mounted Atlas.copco centrifugal air compressor. In 1998, in the four-phase project filament project supporting compressed air expansion project, the PHC type compression heat dryer produced by two US-owned companies Newmantek (Wuxi) Gas Source Purification Equipment Co., Ltd. was purchased. 200m3/min and 250m3/min, equipped with a front-mounted CooperJoy centrifugal air compressor. Due to domestic manufacturing, the import of key components ensures the operational reliability of the equipment and greatly saves investment. The equipment has been invested since November 1998. Up to now, the operation is stable and reliable. In 2000, the company once again purchased 3 sets of PHC type drying of Newmantek Wuxi Company, with a drying capacity of 280m3/min.

1 Compressed heat dryer has been widely used in Yihua for more than ten years. From the introduction of the whole set to the domestic manufacturing, from the oil-free screw machine to the centrifugal air compressor gradually adapting to the process. It seems to be very successful.

2 The equipment runs reliably and stably, fully automatic control, less maintenance work, and obvious energy saving effect.

3 The reliability of key components determines the reliability of the equipment, such as PLC, switching valves, water separation and the reliability of the hydrophobic system is particularly important.

4 The device can also be equipped with a switching function according to the dew point temperature to further save energy.

5 Since the gas passes through the desiccant in the two towers most of the time, the pressure loss of the gas is slightly larger than that of other types of dryers, so be careful when purchasing.

6A, B tower in the heating and regeneration stage, the heat radiated outward is large, so appropriate insulation should be added on the tower body, and the equipment should be placed in a well-ventilated and heat-dissipating environment.

7 The gas temperature required to enter the dryer is as high as possible (preferably 140 to 180 ° C) to obtain a dry gas having a low dew point.

Medical Instruments Stamping Moulds refer to to make the products of stainless Steel Dental Autoclave Sterilizer, stainless steel surgical tray, dental medical dish, lab instrument tools, dressing jars and so on, which are designed for the hospital, clinic, lab, etc. Basically for sterilizing of surgical, dental instruments, glassware, culture medium and biological dressing, etc.


Stainless Steel Dental Autoclave Sterilizer Technical Specifications:


  1. High quality SUS304 stainless steel
  2. Overpressure auto-discharging at 0.145-0.165Mpa
  3. The highest working temperature: 126'c-129'c

  4. Dual scale numerical pressure gage indicate temperature and pressure

  5. Operating easy, security and reliable

  6. Dual heating system of coal or gas and electric

  7. Dimension of sterilizing chamber: dia280*h243/383mm


Stainless Steel Dental Autoclave Sterilizer Stamping Mould Processing:



CNC: 4 PCS

WEDM: 3 PCS

WEDM-HS: 2PCS

EDM: 4 PCS

Radial Drill: 6 PCS

Sawing machine: 2 PCS

Griding machine: 5 PCS

Milling machine: 4 PCS

Bending drill: 5 PCS

Lathe: 2PCS

Tapping center: 1 PCS

Plate shears: 2 PCS

Punch: 3 PCS

Hydraulic machine: 10 PCS


Stainless steel dental autoclave Sterilizer mould press machine


Blanking stainless steel metal sheet in a certain shape as per product dimension, then drawing the stainless steel metal sheet to the requested shape, annealing process must be applied during this process, then sizing die must be used to keep it in good shape, shearing stainless steel dental autoclave sterilizer product, punching holes requested on the drawings and welding process is also used, the last procudure is doing surface treatment for stainless steel dental autoclave sterilizer product. Surface treatment is including polishing processing and electrolytic process etc. as per your technical requirements.


Stainless Steel Dental Autoclave Sterilizer



FAQ:


Q1: Does Stainless Steel Dental Autoclave Sterilizer support customization?

A1: Yes, we welcome you to order customized Stainless Steel Dental Autoclave Sterilizer, please send us with your drawings ( 2D or 3D ).


Q2: How do you ship the products?

A2: As per initial quotation discussed whether by FOB incoterms or CIF incoterms, by air or by sea according to your requirements.


Q3: What is the warranty for the product?

A3: Normally 2 years is our warranty, if you request more, we may discuss it together.



Medical Instruments Stamping Moulds

Medical Instruments Stamping Moulds,Stainless Steel Dressing Jar,Stainless Steel Medicine Bowl,Stainless Steel Medical Lotion Bowl

Zhejiang Ceeto Molding Technology Co.,Ltd. , http://www.ceetomold.com