Nowadays, in many scenic spots, electric sightseeing vehicles are gradually favored by tourists because of their good viewing attitude, smooth and comfortable performance, and good guide services provided with the vehicle. Gradually become the major travel tools in the area. With the continuous increase in the number of passengers traveling, the daily workload of electric sightseeing bus drivers is also much greater than in the past, so after a day of exhausting driving work, many drivers choose to stop the tour at random. However, this practice often damages the service performance and life expectancy of the sightseeing vehicle. Therefore, the following points must be paid attention to when parking the electric sightseeing bus.
First, after the usual work, park or visit and other guests should park the electric sightseeing bus in a shaded place while parking at the end of the normal working hours, and configure relevant sun protection equipment such as shading baffles and blackout cloths. Excessive temperature environment or direct exposure to sunlight for a long time can cause the sightseeing car battery to overheat and cause physical activity to decline, accelerating the battery aging process.
Second, pay attention to insulation when parking sightseeing vehicles in winter. If the outdoor temperature is extremely low, the detachable battery should be stored indoors for storage. Because the electrolyte solution in the battery will freeze when the temperature is extremely low, the battery must be thawed before it can be recharged. Otherwise, it will cause great damage to the battery. Therefore, various measures are taken to prevent the battery from freezing in the case that it must be charged after use in the winter.
Third, in the off-season if the long-term do not use electric sightseeing car, should maintain the battery charge status. Because if it cannot be charged in time after use, such a long-term storage state will reduce the battery capacity of the battery, resulting in greatly reduced endurance performance. Therefore, in the state of long-term storage, it is necessary to check the capacity of the supplementary battery in time to maintain the filling state.
Fourth, after parking the electric sightseeing car for daily use, it should be checked that the battery switch has been turned off, the key has been pulled out, the parking brake device has been started, and the line is left after confirmation.
Aerial Working Truck, Aerial work truck, Sky lift truck, Overhead Working Truck transport refers to the staff and equipment to the site to be used and air operations of special vehicles.
use
Aerial Working Truck Crank arm type overhead working truck can overhanging operation, across some obstacles or in a lift can be carried out more work; Platform capacity big, for two or more people work at the same time and can carry a certain device; Lift platform mobility, convenient transfer site; Beautiful shape, suitable for indoor and outdoor operation and storage. Applicable to the station, wharf, shopping malls, sports venues, residential property, factories workshop and so on a wide range of aerial work.
Folding boom overhead working truck trailer type, mobile convenience, folding boom compact structure, adopts the new type of high quality steel, high strength, light weight, direct access to the alternating current (ac) or use dc power start itself, construction speed is quick, table can be increased and horizontal extension, also can rotate, the obstacles to reach the working position, is the ideal aerial work equipment.
In both assignments in the bucket and rotary seat is equipped with control devices, remote control of engine start/stop, high speed/low speed, adopting electro-hydraulic proportional valve control arm movements, good stability, working arm can be right and left 360 째 continuous rotation, tank level automatic linkage for homework, main pump failure emergency pump down homework groove can be manipulated, and night lighting, lifting heavy objects. Car leg alone separate, adjustable, can realize the vehicle on uneven road leveling. Can the vehicle mobile and convenient, suitable for narrow area, a side operations. Products are widely used in electricity, street lamp, municipal, gardens, communications, airport, built (revised) ship, transportation, advertising, photography, and other areas of the aerial work.
Multifunctional and multipurpose
Through the big arm front bracket, can be quickly installed lifting device or platform, realize the material function such as lifting, lifting, and manned aerial work, at the same time to extension assignments device and a variety of work device quickly switch provides the interface.
3 d rotation lift
Design three-dimensional rotating lift device, already can keep by lifting material profile automatically, and can realize the lifting materials in space any height, any location and any direction adjustment request, sensitive speed control precision, micro performance is good, can meet the large underground structure in high altitude and ventilation pipe installation requirements.
Aerial Working Truck classification
According to the form of its lifting mechanism, generally can be divided into the telescopic arm type (ZhiBeiShi), folding arm type (crank arm type), vertical lift and hybrid four basic forms, etc.
Aerial Working Truck
Aerial Working Truck,High-altitude Operation Truck,Overhead Working Truck,Jmc Aerial Working Truck,Bucket Work Truck
CLW GROUP TRUCK , http://www.clwgrouptruck.net