If a new car is bought, it will be cherished. If the owner does not know how to maintain it, the life of the car will be reduced. Especially the new car running-in period is the most important. Its future use is closely related to the running-in period. Therefore, car owners should pay attention to maintenance when buying a new car. Who wouldn't want to buy a car for a decade and a half? Their car has just started to run at 5000 km. Beimai Auto Parts Consultant will tell you about how to maintain the new car and the precautions for new car maintenance.
1, the new car running and driving often shifts
When driving a new car, you can't keep it in a gear position for a long time. The gears of each gear should be run-in. What section of the road should be run with your car, so that it is “familiar†with each section of the road.
2. How to maintain the new car
I bought a new car in the running-in period, and must be in time for maintenance. Maintenance according to the manufacturer's maintenance cycle, replacement of the filter and oil and other places of inspection, must be carefully maintained.
3, the added fuel should be guaranteed
Many new car owners buy cars that are cheaper to buy. In order to save money, everyone will go to some private petrol stations with lower oil prices. However, the quality of the oil at these stations is not guaranteed, and the damage to the vehicles can be large or small.
4, to avoid frequent vehicle operation
If the new car is often fully loaded during the running-in period, it will be overloaded, which will increase the load on the engine and gearbox. Excessive engine output due to high load will cause excessive wear of the machine parts in the long run.
5, try to park the car in the garage, do not have strong sun exposure when parking, reduce the rain.
6, do not dry the car, the small sand on the top may wear the paint surface, must be washed with water.
7. When the car is just bought, seal the glaze once, and then polish it less and polish more.
8. Don't stop and put it out when you are out of the parking. If you are in trouble, you will be recruited to paint.
In terms of new car maintenance, the owners do not have to be too cautious. As long as the normal driving and maintenance can be carried out, the running-in period of the car should be run-in according to the running-in standard. Do not drive too fast or too heavy. The most important during the running-in period is related to the service life and performance problems of driving in the future.
The submersible motor is a three-phase motor and its rated revolution speed is 2850 RPM every minute at 50 HZ.
The submersible motor is vertical suspended construction. It is airtight with oil-immersed, interior of the motor is completely filled with special lubricant as lubrication, insulation and thermal conduction. Because the submersible motor is limited in varied wellhead, various series and sizes of the submersible motor are designed in order to meet requirements of different oil wells. It also can single, double or multiple sections tandem according to the different power.
Our company can produce the submersible motor of 375 series, 456 series, 540 series, 562 series and 172 series of submersible motors. We can produce the anti-temperature Submersible pump which can resist 90℃.120℃ and 150℃ according to the requirement of customers.
Petroleum Submersed Motor
Electric Water Pump,Electric Submersible Pump,Oil Pump With Linear Motor,Electric Water Pump Motor
Tianjin RongHeng Group LLC , https://www.ronghenggrouppump.com