After the “Shenzhen Sports Car Brake Case†occurred, the traffic control departments of various cities also increased their review of modified cars. How could the modified vehicles pass the annual review has become a concern for many people.
The appearance of the car is not the best modification through the annual review, whether it is to change the color of the car or film for the car are not allowed. From this point of view, it seems that it is very difficult for a modified vehicle to avoid the restricted area. Therefore, many people gave up the idea of ​​a modified car. In fact, the modification itself is not as difficult as it seems. Judging from the situation in recent years, there are no clear provisions in the relevant areas to stipulate what kind of modified vehicles are considered to be in compliance with national laws. If you want to successfully pass the annual inspection, what aspects of the refitting conditions need to be turned into a key issue. The following describes the performance modification that can be passed through several aspects of the annual review.
1. Modification of the brake
Replacing the brake pads will not only improve the braking performance, but also increase the possibility of passing the annual inspection. The brake pad material is mainly composed of metal, rubber, non-asbestos, ceramics and carbon in a certain proportion. Properly increasing the proportion of non-asbestos can improve the comfort of use, in order to be more flexible in the process of use, according to a certain proportion to change the brake pad material, so as to make the operation more convenient. If the pursuit of efficient and convenient results, in the braking process, the converter can also add other types of metal in their own brake pads. This will not only improve the performance of the brake pads through annual review.
2. Modification of the power system
As we all know, engine oil plays a decisive role in the efficient operation of the engine system. It requires the use of high-performance, fully-combined engine oil, which can speed up the engine's operation and protect the performance of the engine. At the same time, it enhances the dynamic feeling of driving. Ensure the safety of the conversion.
3. Modification of the wheel
If the rims are too large, this will cause modified cars to fail to pass the annual review. Even so, many owners only prefer the wheels of more individualized ostentation. In fact, many stern staff do not allow non-original wheels, so to be on the safe side, Finally, the rims sold by the original manufacturer were used.
4. Modification of chassis suspension
Enhance the rigidity of the chassis can improve handling performance, while many owners of automotive performance requirements are very high, they are more inclined to modify the chassis by adding a chassis to strengthen the lever. In order to play a proper role, when anti-roll bars are installed, they must be installed together with the suspension. At the same time, the converted suspension must be the same as the height of the original car.
The above several aspects of the modification are to make further modifications to the vehicle while ensuring the basic performance of the components, and of course, to a certain extent, improve the possibility of passing the annual review.
DNDT series industrial online inspection radiography system usually applies with leading C-arm structure, it always transmits workpiece into lead room by table roller, and also can connects with workpiece production line to be flow inspection, with cooperation between X-ray and industrial TV, users can view real time inspection images directly, which can easier judge appearance and type of failure, then finish saving and processing for the picture to improve its definition.
As most important part of radiography system-image intensifier/flat panel detector, we applies with products which manufactures by famous France Thales/Pelkinelmer, varian company, it not only has advantages of high resolution and low noise, but also with characteristic of big dynamic range which can offer reliable image information for users.
Electrical controlling unit is an intelligent controlling system which with core of PLC, it matches with servo driver and rotation coder which can finish relative inspection procedure and collects images by manual/ semi-auto modes after diameter alignment of different workpiece models.
Online Inspection System
Online Inspection System,Pipe Online Inspection System,Tyre Online Inspection System,Steel Wheel Online Inspection System
Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com