It is common for the steering wheel not to return to normal when parking in daily life. Most of these are sloppy and overwhelming owners. In fact, such parking habits are not good, and often such parking will cause damage to the vehicle.

If the steering wheel does not return right, it involves some technical aspects of the steering system and suspension system. One or two words we certainly can not tell, it will be boring to read it, for ordinary car users may not be interested in understanding too much.

Summarize several kinds of bad parking methods. Do not enter the seat.

1, parking will be pushed to the side of the roadside stone

Some friends have good parking skills, parking is near the roadside, and parking by the roadside is a good thing, but don't pass it. At the time of stopping, it may be a few millimeters to the stone along the way. However, when it is opened, it is not easy to control. When it is accidentally squeezed into the tire , the weakest part of the tire is the sidewall, and it is easy to break the sidewall. And the rupture of the sidewall is often not repaired, only for new tires. And even if it did not break at the time, the wear of the sidewalls would eventually leave security risks for the future of the car. Don't let casual parking habits hurt your car

2, tilt the car left and right parking

Needless to say, one of the ways to stop the suspension, especially half on the road, and the other half on the road. Injuring the connecting rod, pendulum, ball, etc., this is not a little injury. Once or twice, of course, the problem is not serious, so often stop the problem come, and often do four-wheel positioning do not let casual parking habits hurt your car

3, steering wheel is not playing when parking

If the steering wheel is not turned on when parking, the steering wheel will not return to the wheel, and the gear of the steering wheel and the rack of the steering lever are also in a stressed state. This situation is as if a person is sleeping on his back but has been turning his head and not moving, although it will not cause any harm at the time, but it will cause these parts to accelerate deformation over time. If these parts are deformed, it may lead to the deviation of the vehicle and may also cause the phenomenon of “gesture”. Don't let casual parking habits hurt your car

4, tires on the stone parking, especially sharp stones

The tires stay on foreign objects for a long time, and the pressure on a certain point (or surface) on the tires is much longer than other parts. It takes a long time for the tires to bulge and cause irreversible damage. In addition, the forces on the four wheels are not balanced, and the force uploaded to the supporting parts such as the suspension is also unbalanced. It is also possible to injure the suspension. If the stones are sharp, then the weight is concentrated on the tires. The picture did not dare to think! Don't let casual parking habits hurt your car

5, tire tread half suspended

The weight is concentrated on one side of the tire, and occasionally the problem is not so often. The problem is often stopped. At this time, not the entire tread is subjected to pressure, but is a small part of the tread, which will cause some of the tread to be squeezed. It is troublesome to cause the fracture of the tire cord inside the tire.

6, parking in the high-rise balcony or window.

Xiao Bian does not mean that this is not correct. It is only a matter of carefulness. It is not a big problem. However, it is afraid that the “bear boy” will give you a joke to let you get inadvertent parking habits. Your car

7. Park the car under the tree

Be careful of bird droppings and gums dropped from trees. The guano is acidic and acidic is corrosive. It is difficult to clean the gel on the car paint. Regardless of bird droppings or gums, it will not be cleaned in time. Over time, it will cause damage to the car paint, mainly cracks and scars. Don't let casual parking habits hurt your car

8, park the car at a low place

Normal days have no effect. If rainy days, especially heavy rain, together with poor drainage, the water may accumulate very deeply. Be careful of the car being blisters! Don't let casual parking habits hurt your car

Car loading network advice: Be sure to observe the parking well, check it again, confirm the car is parked correctly, then turn off the lock, if problems are adjusted in time. Many problems with vehicles are caused by the lack of attention to detail in the car, such as the issue we are talking about today. I hope you will pay more attention to some car habits when you are using your car. You may not be aware of the problems that often cause great harm to the vehicle. It is everyone's responsibility to protect the car.


CNC machining/lathe machining turning is the workpiece is fixed on the lathe, using high speed rotating machine drives the workpiece, the turning. tool on the workpiece so the product shape is round. The maximum of our machines can clip the weight of 200Kg, maximum diameter of 450mm, length of 750mm. high speed 3000RPM. processing materials are commonly used in steel, copper, aluminum, stainless steel POM, PS, PMMA, and other metal and plastic. The CNC Machining Turning precision of 0.01mm. concentric 0.01. we have specialized equipment to test products, these instruments include: TESA Grohe, micrometer, projector, calipers. Product surface treatment has anode, electroplating, sand blasting, passivation, surface drawing, spraying, laser carving, such as LOGO, etc..Cnc Machining Turning application in a variety of industries, including: cars, ships, communications, medical equipment, industrial automation equipment.

CNC Machining Turning

Cnc Machining Turning,Anodized Aluminum Cnc Machining Turning,Brass Cnc Machining Turning,CNC Machining Part

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD , https://www.bldcncmachining.com