China National Gold Corporation has established the first advanced large-scale copper and molybdenum mine in high latitudes in China since Wushan High Standards, achieving the perfect connection with international mining advanced technology, and achieving ecological construction and scale development, high-efficiency production, and scientific and technological breakthroughs. The historical breakthrough has an epoch-making significance for China's copper industry. Therefore, China Gold Osan is also known as the new coordinate of China's copper industry.
As the leading domestic benchmark for non-ferrous mineral processing automation, Zhongjin Wushan is the first domestic mining company to adopt the SABC mineral processing process. The separation of copper and molybdenum is difficult, and it is more difficult to filter the copper concentrate after separation of copper and molybdenum. The original use of ceramic filter, international and domestic famous tank filter pressure filter. Ceramic filter filter cake moisture content> 15%, can not meet production needs. Canned filter cake moisture content of 13%, the failure rate is very high, expensive maintenance, driving rate is less than 40%. In order to change the filtration conditions, the mine was successively replaced by the Changjie CJXA high energy filter press produced by Zhangzhou Changjie Filtration Equipment Co., Ltd. in one or two series. The operation was good, the operation and maintenance was simple, and the cost was greatly reduced.
In 2016, Zhongjin Wushan released the theme soft paper “Mining in the Mining Industry and Helping Enterprises Break Through the Ice with Science and Technology Reform†through multiple channels such as the company's Micro Signal, Gold Mining People's Public Account, China Gold News, etc., which highly evaluated the Changjie CJXA high energy. The high quality, high performance and cost-effectiveness of filter presses are as follows:
“With the further improvement of the production capacity of China National Gold Osan Company, many processes in the original system have failed to meet the current production needs, which has not only slowed down the pace of production and operation, but also kept current operating costs and caused unnecessary waste. In terms of filter presses, the company continued to upgrade its technological innovations to continuously improve the output quality and efficiency of concentrates. The company’s leaders attached great importance to it, organized relevant departments to go out for inspections, and sought the most suitable filter press models, and finally live up to expectations. In the year, the company used CJXA high energy filter press of Luzhou Changjie Filter Equipment Co., Ltd. to replace the original ceramics and pressure filter. After the CJXA series high energy filter press was put into use, many advantages gradually emerged, using the side outside feeding method. , The unique filter plate design greatly reduces the moisture content of the filter cake. It adopts the same double-sided filter cloth design as the box type, and it is easier to form the filter cake than the single-side filter cloth design of the vertical filter press. Shorter; reduce diaphragm consumption or damage to the integrated diaphragm filter plate, reduce component loss, improve equipment operation rate; at the same time, with the information technology Together, using PLC and touch screen intelligent control, the whole process is automatically controlled by PLC, which greatly reduces the labor intensity of labor.In terms of productivity, the ceramic filter press produces 200-300 tons per day and the pressure filter produces 400-per-day. 600 tons, while the high-energy filter press produces 700-900 tons per day, and it only needs 20 hours to complete the daily production task, which not only greatly improves the production efficiency, but also reduces the maintenance strength of workers.A CJXA high energy pressure The filter completely replaces 3 sets of ceramics and 2 sets of pressure filters, which not only reduces personnel operation and maintenance, but also reduces the number of replacement of spare parts for maintenance. Compared with pressurizing, ceramics, and belts, the three series accumulated in the year can save more than 10 million yuan in spare parts and electricity. , greatly reducing the cost of production and maintenance, but also in the production process, due to the further improvement of output efficiency, it is also solved the deep-cone thick machine prone to running phenomenon."
Under the background of the new normal of reducing costs and increasing efficiency of the mining industry, Changjie Filter has relied on smart and high-efficiency filter press equipment with its own intellectual property rights, and has accumulated to Jinchuan Group, China Gold, Zijin Mining, Western Mining, Xingfa Group, Wanguo Mining, Xingye Lithium Industry and other industries provide advanced and reliable filtration and washing solutions to solve the filtering and washing problems of copper, lead, zinc, gold, lithium salt, alumina, and other industries, and reach or even exceed the extremely expensive prices in terms of indicators. The well-known foreign brands filter press.
As the leading domestic benchmark for non-ferrous mineral processing automation, Zhongjin Wushan is the first domestic mining company to adopt the SABC mineral processing process. The separation of copper and molybdenum is difficult, and it is more difficult to filter the copper concentrate after separation of copper and molybdenum. The original use of ceramic filter, international and domestic famous tank filter pressure filter. Ceramic filter filter cake moisture content> 15%, can not meet production needs. Canned filter cake moisture content of 13%, the failure rate is very high, expensive maintenance, driving rate is less than 40%. In order to change the filtration conditions, the mine was successively replaced by the Changjie CJXA high energy filter press produced by Zhangzhou Changjie Filtration Equipment Co., Ltd. in one or two series. The operation was good, the operation and maintenance was simple, and the cost was greatly reduced.
In 2016, Zhongjin Wushan released the theme soft paper “Mining in the Mining Industry and Helping Enterprises Break Through the Ice with Science and Technology Reform†through multiple channels such as the company's Micro Signal, Gold Mining People's Public Account, China Gold News, etc., which highly evaluated the Changjie CJXA high energy. The high quality, high performance and cost-effectiveness of filter presses are as follows:
“With the further improvement of the production capacity of China National Gold Osan Company, many processes in the original system have failed to meet the current production needs, which has not only slowed down the pace of production and operation, but also kept current operating costs and caused unnecessary waste. In terms of filter presses, the company continued to upgrade its technological innovations to continuously improve the output quality and efficiency of concentrates. The company’s leaders attached great importance to it, organized relevant departments to go out for inspections, and sought the most suitable filter press models, and finally live up to expectations. In the year, the company used CJXA high energy filter press of Luzhou Changjie Filter Equipment Co., Ltd. to replace the original ceramics and pressure filter. After the CJXA series high energy filter press was put into use, many advantages gradually emerged, using the side outside feeding method. , The unique filter plate design greatly reduces the moisture content of the filter cake. It adopts the same double-sided filter cloth design as the box type, and it is easier to form the filter cake than the single-side filter cloth design of the vertical filter press. Shorter; reduce diaphragm consumption or damage to the integrated diaphragm filter plate, reduce component loss, improve equipment operation rate; at the same time, with the information technology Together, using PLC and touch screen intelligent control, the whole process is automatically controlled by PLC, which greatly reduces the labor intensity of labor.In terms of productivity, the ceramic filter press produces 200-300 tons per day and the pressure filter produces 400-per-day. 600 tons, while the high-energy filter press produces 700-900 tons per day, and it only needs 20 hours to complete the daily production task, which not only greatly improves the production efficiency, but also reduces the maintenance strength of workers.A CJXA high energy pressure The filter completely replaces 3 sets of ceramics and 2 sets of pressure filters, which not only reduces personnel operation and maintenance, but also reduces the number of replacement of spare parts for maintenance. Compared with pressurizing, ceramics, and belts, the three series accumulated in the year can save more than 10 million yuan in spare parts and electricity. , greatly reducing the cost of production and maintenance, but also in the production process, due to the further improvement of output efficiency, it is also solved the deep-cone thick machine prone to running phenomenon."
Under the background of the new normal of reducing costs and increasing efficiency of the mining industry, Changjie Filter has relied on smart and high-efficiency filter press equipment with its own intellectual property rights, and has accumulated to Jinchuan Group, China Gold, Zijin Mining, Western Mining, Xingfa Group, Wanguo Mining, Xingye Lithium Industry and other industries provide advanced and reliable filtration and washing solutions to solve the filtering and washing problems of copper, lead, zinc, gold, lithium salt, alumina, and other industries, and reach or even exceed the extremely expensive prices in terms of indicators. The well-known foreign brands filter press.
As their name implies, the sliding contact surfaces of Angular Contact Spherical Plain Bearings are spherical in shape and inclined at an angle to the bearing axis . Consequently, these bearings are well suited for accommodating combined (radial and axial) loads. Single angular contact Spherical Plain Bearings can only accommodate axial loads acting in one direction. These bearings can be separated, enabling the rings to be mounted separately.
manufactures steel/PTFE FRP (fibre reinforced polymer containing PTFE) maintenance-free angular contact spherical Plain Bearings as standard. Designs with other sliding surface combinations are available on request (Special designs).
Angular Contact Spherical Plain Bearings
Angular Contact Spherical Plain Bearings,Angular Contact Thrust Spherical Plain Bearings,Angular Contact Spherical Bearings,Angular Radial Spherical Plain Bearing
Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de