Molybdenum is relatively rare and precious metals, in the production of molybdenum iron, molybdenum total cost of 97.5%. Therefore, maximizing the recovery rate of molybdenum is very important to reduce costs and improve economic efficiency. Strict control of the links that may cause molybdenum loss must be seized.
(1) MoO3(s) has a high vapor pressure and is easy to sublimate. Therefore, reducing the sublimation of MoO3(s) and recovering molybdenum-containing dust are important steps that must be taken care of.
(2) In the roasting of molybdenum concentrate, the roasting temperature should be accurately controlled, the sublimation amount of MoO3(s) should be minimized, and the high-efficiency purification system should be used to re-calcinate the recovered molybdenum dust.
(3) In the smelting, the sealed furnace body can not only reduce the heat loss, reduce the amount of the reducing agent aluminum , but also reduce the amount of molybdenum loss in the slag, and also facilitate the purification and dust removal of the flue gas. The molybdenum-containing dust collected by the dust collector can be returned to the smelting after being agglomerated. If the dust contains other metal elements, the comprehensive utilization of dust should be considered.
(4) The ferromolybdenum particles contained in the ferromolybdenum slag must be recovered, and the slag crushing can be recovered by magnetic separation.
(5) Finishing chips and furnace bottom iron are the largest amount of molybdenum-containing return materials, which should be re-smelted with cooked molybdenum ore.
Molybdenum Properties Molybdenum is a silver- white refractory metal with a melting point of 2615 ° C, a density of 10.2 g / cm 3 , a small expansion coefficient, almost the same as the expansion coefficient of the special glass of the tube.
Oil Seal is used to seal oil (oil is the most common type of liquid substances in the transmission system, also refers to the general liquid substance) mechanical components, it will need lubricating parts and transmission parts output component segregation, unapt let lubricating oil leakage. Static seal and dynamic seal (general reciprocating movement) with the seals called seals. The representative form of oil seal is TC oil seal, which is a kind of double lip oil seal with self-tightening spring completely covered by rubber.
Oil seal of the scope of work related to the oil seal materials used: material is nitrile rubber (NBR) for - 40 ~ 120 ℃, Alec rubber (ACM) - 30 ~ 180 ℃, fluorine rubber (FPM) - 25 ~ 300 ℃.
Oil Seal
Oil Seal,Rubber Oil Seal,Tamper Proof Oil Seal,Plastic Oil Seal
Hebei Zhonghai Shipping Accessories Manufacturing Co., Ltd. , https://www.zhonghaiship.com