The 400,000 tons/young petrol etherification plant of Uru Petrochemical, designed by the East China Design Branch, has successfully completed the entire process. After two days of smooth adjustment, qualified etherified light gasoline products have been produced. The product has a sulfur content of <50 ppm and an octane rating of approximately 3.3 units, which meets the design criteria.

The light gasoline etherification unit introduced the CDHydro, CDEthers and ISOMPLUS process technologies and process packages of the CDTECH company in the United States. It is currently the largest set of equipment for the introduction of this technology in China. After the light gasoline is treated by the device, the olefin content is reduced and the octane number is increased, which can reduce the blended gasoline olefin content of the entire Wuke Petrochemical Plant and produce more high-grade National IV gasoline products.

The device broke ground on April 16, 2011 and realized China Communications on November 13. Afterwards, after a series of methodical start-up processes such as driving the heat-conducting oil system, drying the arsenic-removing agent, dewaxing the hydrogenation catalyst, replacing the methanol with the etherification catalyst, and driving the methanol recovery system, the entire process of the device was opened up to achieve a successful start. The picture shows the 400,000 tons/young gasoline etherification plant of Wulu Petrochemical, which has just been put into operation.

Medical Consumables Plastic Mould

Hospital and medical consumables refers to waste bins, disposable medical syringe, medical disposable bucket and baskets, the molding material is medical grade PP, volume can be different from 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml to 100ml, and needle is 16G-27G, Needle material: stainless steel 304 and life is 5 years. Please review the following specifications in details:


Standard needle size:


Needle size


Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.


Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.


Machining equipment:


Disposable Medical Plastic Syringe mould CNC


Disposable Medical Plastic Syringe mould CNC


Disposable syringe mould EDM


FAQ:


Q1: How do you control quality of Disposable syringe mould quality?

A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.



Q2: What are the MOQ and leading time?

A: 200000pcs each type; leading time is within 35 days or based on your quantity;


Q3: What are the terms of payment?

A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C are acceptable.


Q4: How to keep us away from risk?

A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.


Medical Consumables Plastic Mould,Metal Injection Molding,Medical Syringe Plastic Injection Mould,Disposable Syringe Plastic Injection Mould

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com