The working principle and application characteristics of NE-type plate chain bucket elevator

The NE type chain bucket elevator is a plate chain type, gravity-induced discharge lifting device. NE type chain bucket elevator is suitable for vertical conveying of powdery, granular, small block-shaped or non-abrasive materials, such as raw materials, cement, coal, limestone, dry clay, clinker and so on.

The NE type bucket chain bucket elevator is a new type of lifting product developed through the introduction of foreign advanced technology. The NE series plate chain bucket elevator is used in various industries. Due to energy saving, the NE type chain bucket bucket elevator is gradually replacing the HL type. And other ring chain hoist. The NE type chain bucket elevator is an inflow type feeder. The material flows into the hopper and rises to the advanced level by the chain of the plate. It discharges itself under the gravity of the material. The main technical parameters conform to the standards of the Ministry of Machinery (JB3926-85). The NE type chain bucket elevator adopts gravity charging and gravity discharge. The chain is a high-strength alloy steel high-strength plate chain that is wear-resistant and reliable. The hard drive reducer is used in the drive section. The hoist is suitable for the vertical transportation of medium, large blocks and abrasive materials (such as limestone, cement clinker, gypsum, lump coal), and the material temperature is controlled below 250°C.

How the NE series board chain bucket elevator works:

The NE series plate chain bucket elevator is an inflow type feeding material. The material flows into the hopper and rises to the advanced level by the plate chain. It discharges itself under the gravity of the material. This series of hoists have many specifications (11 kinds of NE15~NE800). The production capacity is high and the energy consumption is low. The machine adopts a full-enclosed casing with a low chain speed, and there is almost no return phenomenon, so the reactive power Low loss, low noise, long life.

NE series plate chain bucket elevator features:

1. Good sealing and less environmental pollution.

2. Easy operation and maintenance, less wearing parts.

3. The use of low cost, due to energy conservation and maintenance less, the use of low cost.

4. Reliable operation, advanced design principle, guarantee the reliability of the whole machine operation and good sealing performance. Less environmental pollution.

5. Structure port model, high precision. The shell is folded and the middle pressure bar, and then welded, the rigidity is good and the appearance is beautiful.

6. The mechanical size is small. Compared with other hoists of equal lift, this hoist has a small mechanical size.

7. Large conveying capacity, this series of hoists have a variety of NE15 ~ NE800 specifications. The lifting range is 15~800m3/h.

8. Easy to operate, less maintenance, fewer wearing parts. The conveyor chain is a sleeve roller chain, which induces gravitational discharge and is used for the vertical lifting of various powdery and massive particles.