After long-term development, the mineral processing equipment has become an efficient and energy-saving mineral processing equipment, greatly improving the mining rate of mineral resources and avoiding waste of resources. However, in the process of using the mineral processing equipment, some faults will occur more or less, which will affect the production efficiency of the mineral processing equipment.

Among the whole set of mineral processing production lines, there are many reasons for the failure of the mineral processing equipment. Environmental factors, material conditions, quality of the relevant operators, management level, human-machine linkage, human factors, the quality of the equipment itself, etc. may cause the mineral processing equipment to malfunction. . In the event of a fault in the ore dressing equipment, the cause of the failure of the ore dressing equipment must be identified, and a reasonable solution should be made for the cause.

The best ways to solve common faults in mineral processing equipment are:

1. The coupling bracket bolts are loose and the bearing housing bolts are loose.

Solution; view and stabilize the bolts.

2, transmission organization noise is large

Solution: The gears are smooth and short.

3. Gear spacing changes.

Solution: Add smooth grease and stabilize the bolts.

4, broken oil or seal damage

Solution: Repair and clean the valve for a long time with less repair and cleaning, refueling or replacing the seal according to the rules.

TTA Tolyltriazole

Product Introduction

CAS: 29385-43-1

Water treatment chemical Corrosion Inhibitor Tolyltriazole TTA is white granule or powder, TTA is a mixture of 4-methyl-benzotriazole and 5-methyl-benzotriazole, the melting point is from 80℃ to 86℃, soluble in alcohol, benzene, toluene and chloroform, and hardly soluble in water.

TTA is a kind of Water Treatment Material , mainly used as antirust and corrosion inhibitor for metals (such as silver, copper, zinc, lead, nickel, etc..), and for antirust oil (tallow) products, the gas phase corrosion inhibitor of copper, lubricant additive, cycle water treating compound and auto antifreeze. TTA also can be concernedly used with manifold sterilization algaecide and has a very fine corrosion mitigation effect on close cycle cooling water system. It can used together with
DBNPA 2,2 Dibromo 3 Nitrilopropionamide, Isothiazolinones Bactericide, Polyaluminum Chloride PAC and PAM Polyacrylamide Flocculant.





White or light yellow granular

Content, %

99.5 min

Moisture, %

0.2 max

Melting point, ℃


Ash content, %

0.05 max

Colour (Hazen)

45 max



Package and Storage:

25Kg/bag or customers' requirement.

Easy to wet, please put in aeration, dryness place, do not mix it with food and seed.

TTA Tolyltriazole

Corrosion Inhibitor Tolyltriazole,Tta Tolyltriazole,Water Treatment Chemical Tta,Tolyltriazole Tta For Water Treatment

Zhengzhou Chorus Lubricant Additive Co.,Ltd. ,